Deformed rebar is a protruding rebar used to increase the strength of concrete. Deformed rebar is composed of carbon and manganese elements. It can be used safely in construction projects with its gear structure. There are depressions and protruding structures on the surface of deformed rebar.
When did deformed rebar start to be used? Is deformed rebar mandatory?
The construction industry used to use flat rebar in general before the 21st century. Later, it was understood that the use of flat rebar in the structures caused many damages and that a good adhesion was not established with the concrete. Thus, the production and use of deformed rebar began. In our country, it became mandatory after the 1998 regulation.
How is deformed rebar produced?
Deformed rebar is a kind of high-strength steel, produced by controlled cold bending of the hot-rolled bar. There are protrusions known as ribs on the surface of this rod, which is why it is called deformed rebar. Although it is actually known as rebar, it is not rebar, but steel. The dimensions of the ribs on the rods vary from 8 mm to 40 mm.
How many kg of 1 bar rebar? how much does 1 mt of rebar weigh?
Deformed rebar weight chart:
REBAR WEIGHT CHART
|
DIAMETER (Ø |
Kg/1 m |
Cm2 |
Cm3 |
Cm2/m |
|
6 |
0,222 |
0,283 |
0,042 |
188 |
|
8 |
0,395 |
0,503 |
0,050 |
251 |
|
10 |
0,617 |
0,785 |
0,098 |
314 |
|
12 |
0,888 |
1,131 |
0,170 |
377 |
|
14 |
1,208 |
1,539 |
0,269 |
440 |
|
16 |
1,578 |
2,011 |
0,402 |
503 |
|
18 |
1,998 |
2,545 |
0,573 |
565 |
|
20 |
2,466 |
3,142 |
0,785 |
628 |
|
22 |
2,984 |
3,801 |
1,045 |
691 |
|
24 |
3,551 |
4,524 |
1,357 |
754 |
|
26 |
4,168 |
5,309 |
1,726 |
817 |
|
28 |
4,834 |
6,158 |
2,155 |
880 |
|
30 |
5,549 |
7,069 |
2,651 |
942 |
|
32 |
6,313 |
8,042 |
3,217 |
1005 |
|
34 |
7,127 |
9,079 |
3,859 |
1068 |
|
36 |
7,990 |
10,179 |
4,580 |
1131 |
|
38 |
8,903 |
11,341 |
5,387 |
1194 |
|
40 |
9,865 |
12,566 |
6,283 |
1257 |
|
42 |
10,876 |
13,854 |
7,274 |
1319 |
|
44 |
11,936 |
15,205 |
8,363 |
1382 |
|
46 |
13,046 |
16,619 |
9,556 |
1445 |
|
48 |
14,205 |
18,096 |
10,857 |
1508 |
|
50 |
15,413 |
19,635 |
12,272 |
1571 |
How much rebar goes to one floor?
In general, the calculation of rebar is carried out as follows:
The Amount of Rebar Used Per Square Meter in the Foundations: 35-45 kg. The Amount of Rebar Used Per Square Meter in Asmolen Flooring : 30-35 kg. The Amount of Rebar Used Per Square Meter in Normal Floor Coverings: 25-30 kg.
What is the price difference of 8 and 10 in rebar?
The price differences of 8% and 10% in deformed rebar (according to the finished product) are as follows according to the regions:
Biga 10% rebar +300tl / 8% deformed rebar price difference +450tl
Istanbul 10% deformed rebar +350tl / 8% deformed rebar price difference +450tl
Izmir 10% deformed rebar price difference +200tl / 8% deformed rebar price difference +400tl
Karabük 8-10mm deformed rebar price difference (same price) +700tl
Payas 10% deformed rebar price difference +200tl / 8% deformed rebar price difference +400tl
How much is deformed rebar?
The price of deformed rebar is between Q12-32 mm. The price of 1 ton is calculated between 16.800-17.000 TL this week, excluding transportation, depending on the region. Rebar between Q12-32 mm is referred to as thick rebar and sales are based on the price of these products.
Comments
No comment yet.